814F Series 2 Wheel Dozer

Top performance... Caterpillar design combines power, mobility and operator comfort for high productivity. Reliable, durable operation... Rugged construction and easy maintenance provide long life with low operating costs.

Power Train

Delivers top performance, durability and reliability.

Cat C9 ACERT Engine

Delivers, at a rated speed of 2,100 rpm, flywheel power of 173 kW 232 hp and meets the U.S. Environmental Protection Agency Tier 3 emissions regulations and Stage IIIA EU Emissions Directive 9768EC. With high horsepower and low displacement, this innovative engine provides excellent fuel economy and durability which can significantly reduce operating costs.

Torque Rise

Is increased as a result of the electronically controlled, computer actuated unit fuel system that provides high injection pressure and more precisely controlled fuel delivery as the engine lugs back from rated speed.

ADEM IV Fuel System

Is a Caterpillar electronic control module which provides improved engine response, performance, fuel efficiency, troubleshooting diagnostics and reduced emissions. It allows integration with the electronic transmission control for maximum power train efficiency.

Turbocharger

Packs more dense air into the cylinders for more complete combustion and lower emissions, improving performance and engine efficiency. These benefits are especially useful at high altitudes.

AirtoAir Aftercooler

Reduces smoke and emissions by providing cooler inlet air for more efficient combustion. This also extends the life of the piston rings and bore.

Dual Cooling Jets

In the block spray oil on the piston skirt and cylinder bores keep ring temperatures low for long ring and liner life with excellent oil control.

Pistons

Are two piece articulated with forged steel crowns for excellent strength and aluminum skirts for reduced weight. Pistons are oil cooled for increased heat dissipation and longer life.

Valves

Four per cylinder allow for good airflow, enhancing fuel efficiency and heat rejection. Valves and unit injection system are camshaftactuated for precise timing.

Crankshaft

Is a steelforged, carburized and inductionhardened for longterm durability. It is dynamically balanced for smooth operation. The crankshaft is completely regrindable, and the connecting rods can be removed through the tops of the cylinders for easy servicing.

Cat Engine Oil

Is formulated to optimize engine life and performance and is strongly recommended for use in Cat diesel engines. Engine oil change interval is 500 hours.

Cat Planetary Powershift Transmission

Features heavyduty components to handle tough jobs. The 345.4 mm 13.6 in planet drives operate in all gears, forward and reverse.

HeavyDuty Axles and Brakes

Are designed to last in all kinds of operating conditions. Two front axles disc brakes provide improved braking capability and better heat dissipation. Planetary final drives use freefloating, bronze sleeve bearings in the planet gears. Oil disc brakes are adjustmentfree and fully enclosed to lock out contaminants.

Front Axle

Is rigidly mounted to the frame to support the weight of the compactor, internal torque loads and external loads applied during compacting and dozing operations.

Rear Axle

Includes a trunnion, two trunnion supports and associated bearings, allowing it to oscillate plus or minus 12 degrees.

Four Piece Axle

Contains two axle shaft housings the center housing and the intermediate housing. Features and benefits of this design include Inboard brakes on the front axle only are positioned immediately adjacent to the differential and operate on the low torque side of the final drive, requiring less braking to stop the machine.

Structures

Enhanced design and materials provide superior strength to the purpose built structures of the 814F Series 2.

Structure Construction

Combines the use of robotic welding on up to 90 percent of the 814F Series 2 with castings in several areas to increase strength by helping spread the loads and reduce the number of parts. This provides highly consistent welds with deep plate penetration and excellent plate fusion. The benefits are increased durability and fatigue strength. The computer controlled machining ensures the alignment of pin bore, axle pad, cab mount and transmissionengine components.

Box Section End Frame

Designed to resist twisting and torsional forces, the box section engine end frame provides a solid foundation for the axles, engine and transmission.

Front Frame

With two plates provides maximum structural strength during compaction and dozing applications.

Spread Hitch Design

Improves load distribution by reducing loads to the hitch bearings. The large center hitch design improves hydraulic line routing and makes service access easier.

Upper and Lower Hitch Pins

Pivot on doubletapered roller bearings. Boxstyle sections in the hitch pins and crossmember assembly improve frame structure strength. Increased diameter lower hitch pins add to the robust design.

Engine and Transmission Mounts

With rubber isolation mount design reduces noise and vibration.

Operator Station and Controls

Comfort and control a top quality operators station helps maximize productivity.

1 Exceptional AllAround Viewing Area

Reduces strain and fatigue, making operators more productive.

2 Caterpillar Monitoring System

With electronic analog gauges is a highly effective and reliable warning and diagnostic system. As a warning system, it constantly checks machine functions and tells the operator when there is a problem. Easytoread gauges display fuel level, temperatures for engine coolant, transmission and hydraulic oil, engine rpm and gear range. Hour meter, odometer and analog tachometer readings are also displayed. As a diagnostic system, it identifies conditions, shows current readings and plays back maximum or highest readings registered during recent operations. The right side panel contains a three level warning system, providing fulltime monitoring of key functions. The system alerts the operator of immediate or impending problems with air inlet temperature, brake oil pressure, electrical system, low voltage, engine oil pressure, engine overspeed, fuel filter status, parking brake status, steering oil pressure and transmission filter status.

3 Quick Gear Kick UpDown Button

Lets the operator easily downshift or upshift to a different gear. It is a convenient way to shift that saves time and effort.

4 Ignition Key StartStop Switch

Is positioned for easy machine starting and stopping.

5 12Volt Power Supply and Cat Electronic Technician ET Diagnostics

Is provided inside the cab for powering radios, telephones or a laptop computer. This is particularly useful for powering a laptop running Cat ET to access the enhanced engine and transmission control system diagnostics.

6 Steering Column

Adjusts to multiple positions. The leatherlike steering wheel and transmission control provide a sure grip and comfortable feel. The horn is conveniently located in the center of the steering wheel.

7 PilotOperated Blade Controls

Are conveniently located and allow for precise blade movement.

8 Operator Seat

Is designed for comfort and support. Seat cushions reduce pressure on the lower back and thighs while allowing unrestricted arm and leg movement. A fully adjustable air suspension seat with selfcontained compressor is available as an option.

9 BuiltIn Storage Space

Is designed to hold cups, lunch box, insulated bottle and personal items.

10 Repositioned Vents

Throughout the cab keep fresh air flowing while improving the cabs heating, cooling, defrost and defog capability.

11 Throttle Lock

Allows and operator to set the engine speed and remove his foot from the governor accelerator pedal much like cruise control on an automobile. Using this feature increases productivity, fuel efficiency and improves operator comfort.

12 Decelerator Pedal

On the left acts as both an engine decelerator and a brake that overrides the engine speed selected by the throttle lock. This enables the operator to slow down when throttle lock is engaged and to return to throttle lock without pressing a button. It aids in maneuvering around shovels, haul trucks, tractors or any other obstacle.

13 Windshield WashersWipers

With intheblade washer delivery system are standard features on front and rear windows. The front wiper has intermittent speed capability.

14 Rear Vision Camera Monitor

Connected to a camera mounted on the radiator guard, this monitor allows the operator to see the area behind the machine.

Straight Blade

Multiple boxsection construction with heattreated moldboard and DH2 steel edges and end bits for long life.

Blade Package

Consists of blade, push arms, trunnion mounting, dozer length skid plate, reversible cutting edges, selfsharpening end bits, hydraulic lines guard and hydraulic blade cylinders.

Straight Blade

Is standard on the 814F Series 2.

Dozer Front Frame

Built specifically to handle greater amounts of rimpull, the machine can readily push its weight plus the weight of the material for long distances in heavy dozing applications.

Operator Controls

Lift and tilttip are standard options and the levers are located to the right of the operator.

Application

The 814F Series 2 excels at dozing, spreading fill, backfilling, stockpiling, charging hoppers, maintaining roads and cleaning up around trucks and shovels.

Blade Options

Contact Cat Work Tools and Services for additional blade options which include ulli Coal scoop with tiltlili Woodchip scoop with tiltlili Coal Ublade with 25 degree wing angleliul

Optional Features

Available options augment the 814F Series 2 to meet your needs.

Rear Vision Camera

Uses a camera mounted on the radiator guard and a monitor in the cab to allow the operator to see the area directly behind the machine.

Air Suspension Seat

Provides added comfort for the operator so productivity stays high.

Air Conditioner

Uses blended air and R134a refrigerant for immediate temperature changes.

Radios

Several radio options are available factory installed AMFM CD or AMFM CD with satellite radio a service contract is required from a satellite radio provider.

Product Link

Allows the customer andor dealerto monitor the machine from a remote location.

Fast Fill Adapter

Used during peak periods when high production is needed and little down time can be afforded for fueling. Fuel is pumped into the tank through a filling nozzle at rates up to 378.5 liters 100 gallons per minute. As fuel enters the tank, air is forced out through an open vent. When the tank is full, the vent closes and the filling nozzle.

High Speed Oil Change

Uses an evacuation system to speed up the engine oil change which helps to reduce the service time.

Turbine PreCleaner Group

Replaces the standard statatube air cleaner with a turbinestyle air intake cleaner which is useful in dry, dusty work conditions.

Counterweight

Is located on either side of the push arms. For each specific application, there is a correct machine weight for proper balancing of traction, flotation, mobility and response. Lower machine weight is usually required for typical second gear applications such as fill spreading, stockpiling, road maintenance, towing implements and shovel cleanup. Higher machine weight is usually required for such typical first gear applications as heavy dozing and push loading.

Tire Options

Are available from Michelin two options.

High Intensity Discharge HID Lights

Adds four lights on the cab and two on the radiator guard to brighten up the work area. HID lights are two times brighter than the standard halogen lights. Note These lights will be available mid2007.

Serviceability

If maintenance is simple and areas easily accessible, it gets done.

Cat Electronic Technician ET

Is a software program which allows the service technician to find and identify a problem on a machine and to analyze how to fix it quickly. Cat ET provides the capability to access the electronic control modules from a personal computer. Cat ET is used for ulli Viewing active and nonactive diagnostic codes and clearing them after repair.lili Displaying the status of all parameters such as engine speed, gear engaged, control levers position, control switch position, etc.lili Performing diagnostic tests and calibrations of electrohydraulic components.lili Viewing current configurations and changing parameter settings.lili Flashing new Caterpillar software in the electronic control modules.lili Recording all parameters during machine operation. liulA customer version of Cat ET is also available for your fleet of Cat equipment. Contact your Caterpillar dealer for more detailed information.

Caterpillar Monitoring System

Provides diagnostics that allow technicians to review a machines operation and quickly troubleshoots problems. Operating parameters, diagnostic codes and outofrange readings are displayed through the diagnostic connector.

Engine Access

All metal engine enclosure and hinged access doors allow for easy daily maintenance and inspections.

Left Side Service Access

Provides convenient entry to the engine oil filter, grease points, air filter, power train oil dipstick, coolant sight gauge, power train oil fill, power train oil filter and high speed engine oil fill.

Right Side Service Access

Features that are easily reached under the hood include fuel filter and water separator, fuel primer and engine oil dipstick.

500 Hour Oil Change Interval

Increases uptime and production by doubling the time between oil and filter changes without requiring increased oil sump capacity.

Engine Shutdown Switch

Is located inside engine enclosure panel for simple access and extended switch life.

BladeStyle Fuses

Are new to the 814F Series 2. They are located in the cab and improve reliability and serviceability.

Caterpillar Scheduled Oil Sampling

Helps ensure better performance, longer life and increased customer satisfaction. It is an extremely thorough and reliable early warning system which detects traces of metals, dirt and other contaminants in your engine, axle, transmission and hydraulic oil. SOSSM sampling can predict potential trouble early, thus avoiding costly unscheduled failures. Your Caterpillar dealer can give you results and specific recommendations shortly after receiving your sample.

Hinged Hydraulic Oil Cooler and Air Conditioning Condenser

Swing open without special tools and allows the cooling system to be cleaned quickly and easily.

Battery Box

Is located in the right side bumper for convenient access to the maintenancefree batteries.

Tool Box

Is located in the left side bumper for additional protection against harsh work environments.

Complete Customer Support

Cat dealers are the equipment experts.

Machine Selection

Make detailed comparisons of the machines under consideration before purchase. Cat dealers can estimate component life, preventative maintenance cost and the true cost of lost production.

Purchase

Look past initial price. Consider the financing options available as well as daytoday operating costs. Look at dealer services that can be included in the cost of the machine to yield lower equipment owning and operating costs over the long run.

Replacement

Repair, rebuild or replace Your Cat dealer can help you evaluate the cost involved so you can make the right choice.

Customer Support Agreements

Cat dealers offer a variety of product support agreements and work with customers to develop a plan that best meets specific needs. These plans can cover the entire machine, including attachments, to help protect the customers investment.

Product Support

You will find nearly all parts at our dealer parts counter. Cat dealers use a worldwide computer network to find instock parts to minimize downtime. Save money with genuine Cat Reman parts. You receive the same warranty and reliability as new products at cost savings of 40 to 70 percent.

Operation

Improving operating techniques can boost your profits. Your Cat dealer has training videotapes, literature, application and equipment training courses and other ideas to help you increase productivity.

Maintenance Services

More equipment buyers are planning for effective maintenance before buying equipment. Choose from your dealers wide range of maintenance services at the time you purchase your machine. Repair option programs guarantee the cost of repairs up front. Diagnostic programs such as SOSSM and Coolant Sampling and Technical Analysis help you avoid unscheduled repairs.

Engine
Engine Model	Cat® C9 ACERT™
Net Power	232 hp
Flywheel Power	232 hp
Gross Power	253 hp
Net Power - EEC 80/1269	235 hp
Net Power - ISO 9249	235 hp
Net Power - SAE J1349 (JAN90)	232 hp
Bore	4.4 in
Stroke	5.9 in
Displacement	537 in3
Torque Rise	30 %
Cylinders	6
Weights
Operating Weight	47877 lb
Operating Specifications
Turning Circle w/Blade	4703.4 ft
Ground Clearance	14.41 in
Transmission
Number of Forward Speeds	4
Number of Reverse Speeds	4
Forward 1	3.6 mph
Forward 2	6.4 mph
Forward 3	11.2 mph
Forward 4	19.3 mph
Reverse 1	4.1 mph
Reverse 2	7.3 mph
Reverse 3	12.7 mph
Reverse 4	21.8 mph
Hydraulic System
Lift cylinder, bore and stroke	120.62 mm x 913.9 mm 4.74 in x 35.98 in
Steering cylinder, bore and stroke	101.6 mm x 597 mm 3.99 in x 23.5 in
Relief valve setting	2255 psi
Steering
Steering Angle	±36°
Turning Radius, Outside Corner of Blade	23.5 ft
Turning Radius, Inside Corner of Blade	12.2 ft
Blade Specifications
Blade Capacities	2.66 m3
Straight Blade - Capacity	3.49 yd3
Moldboard Length	11.8 ft
Straight Blade - Overall Width	11.8 ft
Straight Blade - Height	3.6 ft
Straight Blade - Digging Depth	1.73 ft
Maximum Lift Above Ground	2.36 ft
Blade Tip Angle - Total	51.9 Degrees
Blade Tip Angle - Forward	10 Degrees
Blade Tip Angle - Back	4.5 Degrees
Blade Tilt Angle - Right	4.5 Degrees
Blade Tilt Angle - Left	8 Degrees
Straight Blade - Maximum Tilt	2.6 ft
Straight Blade - Total Operating Weight	47868.91 lb
Service Refill Capacities
Fuel Tank - standard	117.8 gal
Cooling system	14.5 gal
Crankcase	9 gal
Transmission	13.2 gal
Hydraulic tank	23.2 gal
Differentials and final drives - Front	17.1 gal
Differentials and final drives - Rear	17.1 gal
Dimensions
Height to Top of Cab	10.91 ft
Height to Top of Exhaust Pipe	10.84 ft
Height to Top of Hood	7.79 ft
Ground Clearance to Bumper	2.45 ft
Height to Bottom of Ladder	1.45 ft
Center Line of Rear Axle to Edge of Bumper	6.14 ft
Center Line of Rear Axle to Hitch	5.5 ft
Wheelbase	11 ft
Length with Blade on Ground	22.58 ft
Ground Clearance	1.2 ft